DOOR CHARACTERISTICS
BSA 216 BURGLAR-RESISTENT SWING DOOR
CLASS 4 – UNI EN 1627:2011

- Master frame in steel section with high moment of inertia, made of 25/10-thick steel profile with seat for an EPDM gasket, additional seal in neoprene foam in correspondence with the cover, both designed for resistance to air, water and wind, and for sound insulation.

- Door leaf in 15/10-thick sheet steel, boxed and press-folded around the perimeter so as to form a doorstop that is solid, hard-wearing and elegant.
Internal renforcement sheet in 20/10-thick manganese sheet steel fitted on the entire surface of the door on the external side.
Perimeter frame and intermediate reinforcing crosspiece inside the door in sturdy steel profile.
Multi-layer internal insulating pack, specifically for achieving high flexural and torsional rigidity, glued directly onto the sheets.
Total thickness of the leaf: 65 mm.

The frame and door are specially shaped to obtain co-planarity on the hinge side.



BSA 216.1B BURGLAR-RESISTENT DOOR WITH 1 SWING-LEAF

  • - 2 safety seal bolts applied laterally on the hinge side of the door.
  • - 3 CE-marked steel hinges with three wings machined from a solid block and fitted with thrust bearings.
  • - Three-way lateral anti-panic security lock.
  • - Panic bar without striker handle.
  • - Adjustable lower profile with anti-intrusion and panic bar anti-activation function.
  • - Automatic lower doorsill gasket, external application.

BSA 216.2B BURGLAR-RESISTENT DOOR WITH 2 SWING-LEAVES

  • - Central doorstop made by combining 25/10-thick steel profile with 40/10-thick steel rectangle pipe.Seat for an EPDM gasket and additional seal in neoprene foam in correspondence with the counter-stop of the primary door for resistance to air, water and wind, and for sound insulation.
  • - 2 safety seal bolts applied laterally on the hinge side of the both leaves.
  • - 3 CE-marked steel hinges with three wings for each leaf machined from a solid block and fitted with thrust bearings.
  • For the main door, three-way lateral anti-panic security lock.
  • - Panic bar handle without striker handle.
  • - For the secondary door, safety diverter gate for vertical rods of 16 mm diameter.
  • - Adjustable lower profile with anti-intrusion and panic bar anti-activation function on each leaf.
  • - Automatic lower doorsill gasket, external application, on each leaf.